Screwdriver Bits & Holders - Black & Decker

Hedge Trimmers

In deciding whether to purchase an electric hedge trimmer or a petrol/gas hedge trimmer, consider the tasks you need the trimmer for. Petrol/gas trimmers are more powerful than electric machines. It is important that a hedge trimmer is not so heavy that you struggle to hold it for the duration of cutting the hedge. If the trimmer is too heavy, the risk of dropping the trimmer increases as you tire.

Strimmer Spool - Lines & Accessories

Replacement trimmer spools and lines.

Dimmer & Starter Switches

Night Lights

Outdoor Weather Ready

Black & Decker Masonry Drills

Faithfull Router Bit Sets

Blower

Distance Estimators & Digital Tapes

Isotronic Energy Saving Lamps

Isotronic Energy Saving Bulbs

Isotronic Halogen Lamps

Isotronic Halogen Tubes & Pins

Isotronic Low Energy Bulbs

Isotronic Xenon Bulbs

Expanding Levels

A robust expandable level manufactured from aluminium and features a ruled edge. The tough aluminium cover protects the 3 vials from breakage, additionally, the levels are supplied with fitted end caps for added security and have wall markers supplied as standard. Ideal for hanging pictures , mirrors etc.

Hammers - Sledge

General purpose heavy hammer for building work.

Engineers Scribers

Chainsaws

Chainsaw range can tackle most heavy-duty sawing jobs from cutting logs for fires to pruning large tree branches. Chainsaws are powerful tools and it is imperative that you wear protective safety clothing - particulary a hard hat in case a branch falls on you, leg chaps to protect your legs from the saw should it slip, leather boots with steel toe-caps, gloves with a good grip, protection for your ears from the noise of the saw and goggles to protect your eyes from wood chips. Also avoid loose clothing that might get caught in the chain.

Chain Oil

Spare Chains

Replacement chains for Chainsaws.

Loppers - Anvil

The Anvil lopper is designed to cut larger cross sections and for cutting dead wood. They have a single straight blade that presses against the anvil. Extra long handles provide additional leverage when cutting large diameter branches.

Loppers - By Pass

The Bypass lopper features two slightly curved blades that are designed to produce a cleaner cut by slicing past one another in a scissor like action. Extra long handles provide additional leverage when cutting larger diameter branches.

Secateurs - Anvil

The anvil secateur is designed for larger cross sections and for cutting dead wood.

Secateurs - By Pass

The Bypass secateur features two slightly curved blades that are designed to produce a cleaner cut by slicing past one another.

Secateurs - Felco

Felco claim that their Secateurs are recognised as the finest in the world by horticulturists, professional growers and discerning gardeners in more than 80 countries. Every Felco secateur is subjected to more than 100 quality control processes before leaving the manufacturer.

Secateurs - Sharpeners

Clamps to the back edge of the blade. The grinding jig ensures sharpening to the correct angle. Produces a razor sharp edge on all secateurs, loppers (straight and curved blades) and pruning knives.

Pruning Saws - Fixed Blade

Curved pruning saws require less effort than straight-edged saws because the teeth penetrate the wood more easily. Fixed blade for a ridgid connection between the blade and the handle.

Pruning Saws - Folding Blade

Curved pruning saws require less effort than straight-edged saws because the teeth penetrate the wood more easily. Folding blade for easy storage and transportation.

Border Forks

Particularly suited to areas where space is at a premium or borders are filled with plants. To break up already dug over soil without unsettling established flowers.

Border Spades

Particularly suited to areas where digging space is at a premium or borders are crowded with plants. Ideal for light digging.

Digging Forks

The digging fork is used to break down soil after being dug with a spade. It can also be used as a lawn aerator.

Digging Spades

The digging spade is one of the widely used tools in the garden. Available with either alloy steel or stainless steel blades with a moulded plastic or wooden D handled shafts. They are particularly suited for turning heavy soils such as clay.

Hand Forks & Trowels

The hand fork is ideal for cultivating soil among flower beds. The prongs are usually flat and set at right angles to the shoulder. The weeding fork has shorter prongs ideal for lifting weeds. Hand trowels are Ideal for digging in small areas around flower, plants and shrubs.

Transplant Trowels

These tools are particularly suited for use amongst small plants or seedlings.

Daisy Grubbers

Specifically designed to pull weeds from the lawn. The two fork like prongs are inserted either side of the root, pressure is then applied to handle levering the grubber backwards on the fulcrum, lifting the weed by the root.

Draw Hoes & Swoes

The "draw hoe" is available in a number of styles. They are designed to cultivate the soil or draw drills. As the name suggests the tool is pulled towards the user. The "Swoe" features a flat blade with three bevelled edges which are designed to weed or disturb the soil.

Dutch Hoes

The perfect tool for keeping down weeds, mulching or working in top dressings. They operate in a forward movement working just below the surface of the soil.

Lawnmowers

The Rotary mower is designed to cut the lawn in a scissor action, Certain models are motor driven while more basic models need to be pushed.

Mower Blade Sharpener

Edging Shears

A long handled shear designed to produce a neat and tidy edge to a lawn.

Hose Reels

Polyester fibre reinforced for extra strength, kink resistant and easy to clean.

Mini Angle Grinders - 100mm Disc

These Mini Angle Grinders take 100 mm (4 Inch) discs Extreme care should be taken to ensure correct disks are fitted. Flat discs for cutting off and depressed centre discs for both cutting and grinding. Butting are usually 3.2 in thickness and grinding usually 5.0 or 6.5mm thick. Always double check if disc is suitable for stone or metal. The wearing of goggles is recommended. DONT use depressed centre "cutting wheels" as grinding wheels.

Mini Angle Grinders - 115mm Disc

Mini Angle Grinders are designed for use in tight work areas and with the right cutting or grinding disc, wire brush or sanding disc they are ideal for those medium duty sanding and grinding projects. They are used to cut metal, brick and concrete and are extensively used in construction industry and for cutting grinding applications at home. There are many different attachments that can be used for various materials and tasks, such as cut-off disks, Diamond Blades, abrasive grinding disks, sanding disks, wire-brush wheels and polishing pads. Extreme care should be taken to ensure correct discs are fitted. Flat discs for cutting off and depressed centre discs for both cutting and grinding. Butting are usually 3.2 in thickness and grinding usually 5.0 or 6.5mm thick. Always double check if disc is suitable for stone or metal. The wearing of goggles is recommended. DONT use depressed centre "cutting wheels" as grinding wheels. These Mini Angle Grinders take 115 mm (4 1/2 Inch) discs

Mini Angle Grinders - 125mm Disc

Mini Angle Grinders are designed for use in tight work areas and with the right cutting or grinding disc, wire brush or sanding disc they are ideal for those medium duty sanding and grinding projects. They are used to cut metal, brick and concrete and are extensively used in construction industry and for cutting grinding applications at home. There are many different attachments that can be used for various materials and tasks, such as cut-off disks, Diamond Blades, abrasive grinding disks, sanding disks, wire-brush wheels and polishing pads. Extreme care should be taken to ensure correct discs are fitted. Flat discs for cutting off and depressed centre discs for both cutting and grinding. Butting are usually 3.2 in thickness and grinding usually 5.0 or 6.5mm thick. Always double check if disc is suitable for stone or metal. The wearing of goggles is recommended. DONT use depressed centre "cutting wheels" as grinding wheels. These Mini Angle Grinders take 125 mm (5 Inch) discs

Angle Grinders - 180mm Disc

Angle Grinders are designed for heavy-duty use and are versatile machines for cutting, grinding, polishing and sanding applications. They are used to cut metal, brick, paving slabs, roof tiles and concrete and are extensively used in construction industry. There are many different attachments that can be used for various materials and tasks, such as cut-off disks, Diamond discs, abrasive grinding disks, sanding disks, wire-brush wheels and polishing pads. Extreme care should be taken to ensure correct discs are fitted. Flat discs for cutting off and depressed centre discs for both cutting and grinding. Butting are usually 3.2 in thickness and grinding usually 5.0 or 6.5mm thick. Always double check if disc is suitable for stone or metal. The wearing of goggles is recommended. DONT use depressed centre "cutting wheels" as grinding wheels. These Angle Grinders take 180 mm (7 Inch) discs

Angle Grinders - 230mm Disc

Angle Grinders are designed for heavy-duty use and are versatile machines for cutting, grinding, polishing and sanding applications. They are used to cut metal, brick, paving slabs, roof tiles and concrete and are extensively used in construction industry. There are many different attachments that can be used for various materials and tasks, such as cut-off disks, Diamond discs, abrasive grinding disks, sanding disks, wire-brush wheels and polishing pads. Extreme care should be taken to ensure correct discs are fitted. Flat discs for cutting off and depressed centre discs for both cutting and grinding. Butting are usually 3.2 in thickness and grinding usually 5.0 or 6.5mm thick. Always double check if disc is suitable for stone or metal. The wearing of goggles is recommended. DONT use depressed centre "cutting wheels" as grinding wheels. These Angle Grinders take 230 mm (9 Inch) discs

Routers

Router are flexiable and versatile machines for use in either in the workshop or out on site,fixed to a router table or used freehand. The plunge router allow the motor and router bit to plunge up and down on spring loaded legs, combined with the right router bit (a wide range of router bits are available) their versatility includes uses in : joint construction, cutting groves, making mortise and tenons, dovetail and lap joints, fitting locks and hinges, making staircases, joining worktops and many different decorative and edge moulding uses. The two main sizes collets sizes are; 1/4in which is suitable for lightweight and medium-duty applications or 1/2in which suitable for medium-duty and heavy-duty applications. The 1/2in collet machines generally can use collet reduction adaptors to allow 1/4in, 6mm and 8mm shank router bits to be used.

Belt Sanders

Belt sanders are versatile machines capable of dealing with the roughest of surfaces and are mainly used for the rapid removal of flat stock and on large areas. They are ideal for stripping wood, floorboards, other preparation work and cleaning up glued panels. Unlike any other sander the belt sander cuts in one direction only which means it can be used parallel to the grain of the work piece minimising any cross grain damage. Variable speed makes a belt sander more versatile and less likely to damage delicate surfaces, sanding at a lower speed removes less material and creates less heat so finished such as paint and varnish are less likely to meal and fuse with the belt as they are being removed.

Random Orbital Sander

Random orbital sanders combine the benefits of orbital and belt sanders and can produce fine finishes, even on contoured surfaces, and are versatile enough to tackle paint and rust removal, and polishing, with the right accessories. It can work along and across the grain making it an ideal finishing sander.

Detail & Multi Sanders

Polishers

These machines are designed for polishing - sanding materials. They are basically very similar to angle grinders but operate at lower rpm.

Large Cable Reels 240 Volt

Heavy duty 240 Volt cable reels.

Large Cable Reels 110 Volt

Cable reels for use with 110 Volt tools only.

Cassette Cable Reel

Light duty 240 volt cable reels

Gas Powered Nail Guns

Gas Powered Nail Guns

Faithfull Hasp & Staples

Henry Squire Security Chains

Henry Squire Hasp & Staples

Einhell Air Tools

Garden Thermometers

Min Max Thermometers

Wall Thermometers

Trucks

Trolleys

Combination Squares

A versatile measuring Instrument, to work as a steel rule, Mitre square, Try square and Level. The Square head can travel the entire length of the blade and can be locked in position by tightening a knurled nut.

Mitre -Try & Mitre Squares

Used to mark a right angle to an edge. Can also be used to check the square of a Internal or external angle. Certain squares have a 45 degree angle cut in the stock for marking or checking 45 degree angles. Can also be used as a depth gauge.

Carpenters Squares

The standard Square is manufactured from rigid steel section and is graduated either metric or Imperial. Ideal for squaring work or in the construction of roof framing. Also known as a Flat Square, Rafter Square or Carpenters Square.

Sliding Bevels

For determining existing angles or transferring angles onto a workpiece. The stock is usually made of Rosewood and fitted with brass end caps. The Blade is locked in position by a brass wing nut.

Try Squares

Used to mark a Right Angle to an angle. Can also be used to check the square of a Internal or External Angle. Certain squares have a 45 degree angle cut in the stock for marking or checking 45 degree angles. Can also be used as a Depth Gauge.

Surform Files

Surform Tools are hollow rasps consisting of a steel perforated blade designed for rapid stock removal. Will plane Aluminium, Copper, Plastics, Tiles, Laminated surfaces and other metals.

Surform Planes

Surform Tools are Hollow Rasps consisting of a Steel Perforated Blade designed for Rapid Stock removal. Will Plane Aluminium, Copper, Plastics, Tiles, Laminated Surfaces and Other Materials

Hacksaws

A fixed frame hacksaw takes blades of only one size. An adjustable frame usually accommodates 10in or 12in blades.

Hand Mitre Saws

Powered Pruning Machines

Works just like a manual lopper but with the power of a chainsaw

Expand It Attachments

A Range od the Expand-It attachments for use with Ryobi Trimmers and Brushcuttes.

Lighthouse Torches

A new range of torches from Lighthose.

Stanley Tripod Torches

Auto & Gripper Lamps

Rigid hand help inspection lamps for a wide range of uses.

Expansive Bits

Expansive bits are fitted with an adjustable cutting blade that can be set to shallow out holes of varying diameters.

Knife Files

Used by Tool and Die Makers on work which has acute angles. The blade tapers towards the point.

Chalk Lines

Chalk and Chalk Lines

Paint Kettles Stirrers & Can Openers

Paint kettles, three versions are available, plastic, galvanised and pressed steel. The plastic version has a diameter of 7 inches. Whilst the steel versions are 6 inch in diameter. The pressed steel kettle also features a hook to allow the kettle to be hung from a ladder.

Miracle Saw Blade

The miracle saw blade cuts ceramic tiles and also a range of hard materials such as slate, brick, laminates and metals. The tungsten carbide blade out lasts conventional hacksaw blades by up to ten times.

Non Marking Rubber Mallet

Tile Sealant Smoothers - Sponges

The sealent smoother gives a neat finish to all household sealants.

Tile Adhesive Spreaders

Notched edge Tile adhesive spreaders are designed for spreading tile adhesive, combination pattern has a squeegee edge for use on grouting.

Tile Cutter Replacement Wheels

A wide range of Hand and Powered Tile Cutters.

Tile Cleaner & Sponge

Grout absorber tile cleaner, a polyester based sponge can retain ten times its own weight in water. Ideal tile finish.

Tile Files

Trims, shapes and removes sharp edges from tiles.The hard wearing abrasive mesh is designed to remove sections of tile too small to cut.

Tile Jigsaw Blades

Carbide grit Jigsaw blades are designed for use on ceramic tiles. They perform a grinding action rather than conventional sawing.

Tile Marking Pencils

Tile Saw Blades

Rodsaw style tungsten carbide blades for cutting or shaping in any direction.

Tile Saws

A choice of metal or plastic frames hacksaw style. Either rigid or tension frames. Some with 100mm others with 150mm depth of cut.

Tile Scorers

A tungsten carbide tip which will score both glazed and unglazed tiles prior to snapping.

Tile Spacers

Tile spacers available in both wall and floor pattern. They are designed to be provide a consistent spacing when Inserted between the tiles. Sizes available are 1.5mm and 2.5mm in wall and 5mm in floor.

Tile Wash & Clean Up Kits

Tile Edge Nippers & Lifters

The tile nipper nibbles, out shapes and cuts narrow strips, blades are tungsten carbide tipped.

Tile Kits