Hardpoint Handsaws. Generally a hard point toothed edge will be blue / black from a special high frequency hardening process. It stays sharp longer than normal, but cannot be resharpened.
total: 24 items
total: 11 items
A shortened version of a handsaw, length being usually between 13inch and 15inch. Designed to fit into a toolbox.
total: 4 items
Ergo Handsaw System
total: 3 items
A saw for wood and metal, with a blade capable of cutting through standard nails without damaging the blade. With adjustable blade position. Sometimes called general purpose saw.
Carbide tipped and used for cutting cellular blocks. The more professional type cut through brick stone and cement.
total: 5 items
Purpose made for easy cutting of drywall / plasterboard panels and other man made boards. This saw is particularly suitable for cutting openings, for example socket boxes.
total: 6 items
Coping saws have short deep frames with very narrow fine tooth blades, and are used to make curved cuts in wood or plastic. Blades available designed with pinned ends.
total: 9 items
Traditional flooring saw has a special blade for cutting through and removing sections of floor boarding. Also toothed on curved back edge of saw. Laminator floor saws, designed for use on wooden and laminate floors.
Fret saws similar in design to a coping saw but with a much deeper bow to the frame for working further from the edge. Various blades available for wood and metal cutting. Piercing saws constructed like a fretsaw but not as deep and wide, with an extremely fine blade for use on thin sheet metal. Jewellers use this to cut gold and silver sheet.
total: 7 items
A fixed frame hacksaw takes blades of only one size. An adjustable frame usually accommodates 10in or 12in blades.
total: 18 items
Up to 12in blades are described as hand hacksaw blades. Available in various tooth sizes. 14in and above are described as machine or power saw blades.
total: 14 items
total: 12 items
Similar in design to a keyhole saw, but used for cutting circles.
total: 2 items
Powersaw or machine saw blades, designed with various toothing and various lengths to suit machines of relative size.