18 Volt Drill - Drivers

Powerful 18 Volt Drill Drivers used for drilling metals, plastics and wood (but Not for Impact drilling) and Screwdriving applications.

18 Volt Hammer Combi Drills

Powerful 18 Volt Cordless Hammer (Combi) Drills - For heavy duty hammer drilling. These machines can be used for drilling masonry by use of the selectable impact mode, they can also be used as rotary drills for drilling other materials and if they have variable torque settings (stages) for screwdriving.

Hammer Drills 500-690 Watts

Hammer Drills 500-690 Watts

Hammer Drills 700-1050 Watts

Hammer Drills 700-1050 Watts

Screwdrivers - Cordless 2.4-7.2 Volt

Jigsaws

Jigsaws, with the right blade attached , are capable of a variety of jobs in a wide range of materials from ripping and cross cutting in both solid timbers , man made materials and thin metals, to intricate curves and internal shaped work. Jigsaws with an Orbital or pendulum action speed up cutting by moving the blade in a slightly circular motion, when using a normal jigsaw blade it cuts on the upward movement by moving the blade forward and then back on the downward movement, this increased cutting speed will give you a coarser finish. When precision cutting, plunge cutting or cutting metal is required the orbital action should be turned off. When making a straight cut it is ideal to use a slower cutting speed and a wider blade to prevent the blade from bending or pulling the saw off course.

Angle Grinders - 115mm Disc

Mini Angle Grinders are designed for use in tight work areas and with the right cutting or grinding disc, wire brush or sanding disc they are ideal for those medium duty sanding and grinding projects. They are used to cut metal, brick and concrete and are extensively used in construction industry and for cutting grinding applications at home. There are many different attachments that can be used for various materials and tasks, such as cut-off disks, Diamond Blades, abrasive grinding disks, sanding disks, wire-brush wheels and polishing pads. Extreme care should be taken to ensure correct discs are fitted. Flat discs for cutting off and depressed centre discs for both cutting and grinding. Butting are usually 3.2 in thickness and grinding usually 5.0 or 6.5mm thick. Always double check if disc is suitable for stone or metal. The wearing of goggles is recommended. DONT use depressed centre "cutting wheels" as grinding wheels. These Mini Angle Grinders take 115 mm (4 1/2 Inch) discs

Orbital Sanders 1/3 Sheet

Orbital sanders are often referred to as finishing sanders and they operate with a circular motion to create a smooth finish when used correctly, they work best when only slight pressure is used. They are available in three different sizes, 1/4, 1/3 or 1/2 sheet. 1/4 sheet machines are also know as Palm Sanders and are ideal for one handed use and for using in confined areas. 1/3 sheet machines are ideal for most sanding jobs around the home and are easy to handle. 1/2 sheet machines are aimed at trade applications where the larger pad size measn quicker work.

Orbital Sanders 1/4 Sheet

Orbital sanders are often referred to as finishing sanders and they operate with a circular motion to create a smooth finish when used correctly, they work best when only slight pressure is used. They are available in three different sizes, 1/4, 1/3 or 1/2 sheet. 1/4 sheet machines are also know as Palm Sanders and are ideal for one handed use and for using in confined areas. 1/3 sheet machines are ideal for most sanding jobs around the home and are easy to handle. 1/2 sheet machines are aimed at trade applications where the larger pad size measn quicker work.

Reciprocating - Sabre Saws

Reciprocating saws (also know as Sabre Saws) operate on a similar principle to jigsaws but with the blade protruding from the front of the machine. They are intended for freehand use and a range of blades are available to suit different materials and cutting applications. Most saws have moveable front shoes which help to prolong the life of the blade by evening the wear when cutting thin material. With the correct blade theres virtually no building material it cant cut. it is an ideal tool to have for construction , workshop or for jobs around the home and garden.

36 Volt Hammer Combi Drills

New from DeWalt - a range of 36 Volt cordless power tools which deliver the power of Corded without the cord.

Screwdriver Bits DeWalt - Black & Decker

Tough quality, professional screwdriver bit,including torsion extra grip ribs.

Bandsaws - Accessories & Blades

A range of Blades and Accessories for Bandsaws

Bandsaws

Bandsaws are ideal for rough rip cuts and fast preparation cuts by using a narrow band of toothed metal fitted around two wheels. They can also make highly precise curved cuts at faster speed than a jig saw could do and are useful for cutting irregular shapes. With the correct blade they can be used for cutting wood, metal and a variery of other materials.

Bench & Universal Grinders

A range of Bench Grinders and Linshers.

Biscuit Jointers

Biscuit jointers (also know as plate joiners) are designed to make the creation of perfect joints in all types of wood quickly and easily. The body is similar to an angle grinder and the blade is hidden inside the base, they use plunging motion to cut crescent shaped slots into both sides then wooden biscuits are glued and used to align and strengthen joints, the glue expands the biscuit which creates a strong joint.

Alligator & Scorpion Saw Blades

A range of replacement blades with high speed and Tungsten carbide tipped teeth suitable for cutting Drywall board, hard and soft wood, Plywood, Chipboard, MDF, Building blocks and bricks etc. Available in several lengths.

DeWalt Extreme Masonry Drills

DeWalt Extreme Masonry Drills

DeWalt Metal Drills

DeWalt Extreme Metal Drills

Planer - Accessories & Blades

A range of replacement blades and accessories to suit powered planers. Includes replacement blades, dust bags, guides, belts and mounting kits.

Chucks & Chuck Keys

A wide range of Chuck Keys and Jacobs chucks. Including Taper Mounted and Threaded Mounted Chucks, Keyed and Keyless Chucks.

Circular Saws

Circular saws are ideal for making rapid and accurate long cuts (with the addition of a guide accurate cuts are easily achieved) or cutting large volumes of timber, MDF, Plywood and other man made materials and in some cases with the correct blade, thin metals.

Circular & Trim Saws - Cordless

Circular saws are ideal for making long cuts (with the addition of a guide accurate cuts are easily achieved) or cutting large volumes of timber, MDF, Plywood and other man made materials and in some cases thin metals. A safer alternative to corded circular saws these cordless saws have the advantage of being instantly useable and in some cases are light enough to use one handed.

Jigsaws - Cordless

Features Cordless Jigsaws and a Sabre Saws. The Jigsaws accepts both universal and T Shank blades, the powerful fan cooled motor delivers fast cutting action unto 2000 strokes per minute, giving faster cutting. A dust blower keeps the cut line clear. The 24 volt sabre saw is a reciprocating saw, giving high performance, its lightweight design giving the user optimized power to weight ratio.

Chop & Cut Off Saws

Metal Chop saws are fixed high powered machines designed to produce a clean through cut in steel and ferrous metals. The disc is suspended above the work and the user pulls the saw down towards the workpiece. The disc cutter is a large powerful tool, similar to an angle grinder and is designed to be used with a diamond blade or flat abrasive cutting discs for larger cutting applications.

Flipover Saws

Flipover Saws are freestanding saws which can be converted from a bench saw to a mitre saw by simply inverting the table.

Guides & Collets

Heat Guns

Heat guns provide a safe and effective way of quickly stripping oil based paints such as gloss, eggshell and varnish from wooden surfaces. They are particularly useful for defrosting metal pipes and moulding plastics.

Hinge - Boring Bits

Impact Wrenches

Impact wrenches are high torque drivers with excellent power-to-weight ratios and fitted with 1/2in or 3/4in drives for tightening or loosening nuts and bolts.

Knee Pads

Various materials used, all designed to protect wearers knees.

Tool & Nail Pouches - With Belts

Tool Pouches - With Belts

Laminate Trimmer

Laminate trimmers are small routers single handed machines used primarily for trimming the edges of laminate to size once it is in place, small radius work, chamfers and edge shaping and usually feature an adjustable base for bevel edge cutting.

Saw Tooth & Lip & Spur Bits

Mitre Saw Accessories

A range of accessories for Mitre Saws.

Angle Grinders - 125mm Disc

Mini Angle Grinders are designed for use in tight work areas and with the right cutting or grinding disc, wire brush or sanding disc they are ideal for those medium duty sanding and grinding projects. They are used to cut metal, brick and concrete and are extensively used in construction industry and for cutting grinding applications at home. There are many different attachments that can be used for various materials and tasks, such as cut-off disks, Diamond Blades, abrasive grinding disks, sanding disks, wire-brush wheels and polishing pads. Extreme care should be taken to ensure correct discs are fitted. Flat discs for cutting off and depressed centre discs for both cutting and grinding. Butting are usually 3.2 in thickness and grinding usually 5.0 or 6.5mm thick. Always double check if disc is suitable for stone or metal. The wearing of goggles is recommended. DONT use depressed centre "cutting wheels" as grinding wheels. These Mini Angle Grinders take 125 mm (5 Inch) discs

Electric Planers

Powered planers are the powered version of the classic woodworking hand plane; they are capable of removing large amounts of material with the minimum of effort and in most cases will give a good clean finish. Whilst they cannot match hand planes for finish they are able to plane man made boards such as MDF and Chipboard. Typically, these tools can remove 1.5mm of material with each pass although some can go deeper.

Plug Cutters & Screw Diggers

Using a Screwsink and Plug Cutter in combination with each other allows the user to hide a screw head by sinking the screw below the surface of the piece of wood and then by cutting a plug (for an accurate grain match always use an offcut of the same piece of timber) to place on top of the screw head to hide it. To ensure an accurate fit we suggest that you always use plug cutters and screwsinks from the same range as there are slight differences between manufacturers. The sizes represent the size of the Screw heads required to be sunk and are NOT metric or imperial sizes The sizes represent the size of the Screw heads required to be sunk and are NOT metric or imperial sizes.

Screwdrivers - Mains Powered

These machines have been designed for use primarily in drywall installation although they are also suitable for a wide range of screw driving applications. They are able to drive drywall screws to a set depth time and time again and some models offer an option of collated screws which allows the user to use the machine single handed.

Sanding Belts

A full range of aluminium oxide sanding belts to suit most domestic and industrial belt sanders. The aluminium oxide resin is bonded onto a durable cloth belt and is suitable for both stock removal and finishing applications. Ideal for use on hardwoods, softwoods, ferrous metals and most man made boards.

Planer Thicknessers

A range of portable planer thicknessers for the Professional user.

Universal Stands & Leg Stands

Dewalt universal stands supports all Dewalt mitre saws as well as bench/portable thicknessers. The lightweight design enables easy transportation on and off site.

Vacuums (Wet & Dry)

A range of the popular Dustbuster vacuum cleaners. Cordless hand held cleaners fast and convenient for cleaning everyday dust in the home. Workshop or car interiors.

Work Belts

Various materials of belts available ususally 2 inches wide. Reinforced version and padded leather for example are part of the range.

Drill Holders & Holsters

Drill Holders

Sander Stand

Cordless Kits

A range of Cordless Kits. The kits include Drills and another Cordless Power Tool. All within the same voltage range. Usually supplied with two batteries and one charger. Accordingly reduced overall costs against individual tools.

Lighting - Cordless

Cordless Flashlights. These use the same batteries and chargers as the same voltage Cordless Drills. Ranges 18.0, 14.4, 12.0 and 9.6volts. Giving up to 3 hours continuous use.

Flat Bits

Suitable for use with a mains or cordless drills. The bit features a chip breaker self-centering brad point for safer starting and centering. Ideal for drilling with or against the grain.

Angle Grinders - Cordless

Used for cutting or grinding metal or masonry depending on disc selection. Being not dependant on mains power, gives the advantage of multiple usage anywhere.

Radios - Cordless

Cordless Nailers & Staplers

Tacwise & DeWalt Cordless Finish nailer and staplers.

Socks

Laser Accessories

Angle Drills

Angle drills are compact and lightweight rotary machines and ideal for work in confined spaces where using a standard drill will not allow you to get into tight corners to add that all important fixing screw or fastener. These angle drills are ideal for use between joists and for building and assembling cabinets.

Rotary Core Drills

Dry diamond core drills are designed, with the right core bit, to give clean, rapid cut in brick and internal wall materials with virtually no making good. It is ideally suited for plumbers, electricians, kitchen fitters, heating and ventilating engineers and general builders. The machines use rotary action only which reduces noise and vibration. The harder the brick or the larger the diameter of the core drill, the slower the rpm. Faster rotational speed does not necessarily mean better penetration. Please note that unless specified they are not suitable for use on reinforced concrete or engineering brick.

Mixer / Rotary Drills

Mixer drills are slow speed, high torque machines designed specifically for use with paddles when mixing materials such as paint,floor screed, epoxy and latex, artex,mortar and drywall compound. Mixer drills are also suitable for mixing small batches of sand and cement.

Site Saws

Radial Arm Saws

The radial arm saw is a very accurate, safe to use, robust, reliable and versatile saw for professional woodworkers. They consist of a saw that is suspended on an arm which can be angled, rotated, locked into position. These are precision saws capable of multiple types of function including cross cuts, miter and ripping All DeWalt radial arm saws come pre-assembled and adjusted in a crate for transportation protection and reduced set up time.

150/152mm Blades

Circular saw blades are available in various outside and bore diameters. They are supplied with either High speed or Tungsten carbide teeth which are set at different rake angles dependant on the material being cut. Plastic bore insert bushes are available to accommodate different manufacturers spindle diameters.

160/173mm Blades

Circular saw blades are available in various outside and bore diameters. They are supplied with either High speed or Tungsten carbide teeth which are set at different rake angles dependant on the material being cut. Plastic bore insert bushes are available to accommodate different manufacturers spindle diameters.

180/190mm Blades

Circular saw blades are available in various outside and bore diameters. They are supplied with either High speed or Tungsten carbide teeth which are set at different rake angles dependant on the material being cut. Plastic bore insert bushes are available to accommodate different manufacturers spindle diameters.

200/216mm Blades

Circular saw blades are available in various outside and bore diameters. They are supplied with either High speed or Tungsten carbide teeth which are set at different rake angles dependant on the material being cut. Plastic bore insert bushes are available to accommodate different manufacturers spindle diameters.

230/235mm Blades

Circular saw blades are available in various outside and bore diameters. They are supplied with either High speed or Tungsten carbide teeth which are set at different rake angles dependant on the material being cut. Plastic bore insert bushes are available to accommodate different manufacturers spindle diameters.

250/254mm Blades

Circular saw blades are available in various outside and bore diameters. They are supplied with either High speed or Tungsten carbide teeth which are set at different rake angles dependant on the material being cut. Plastic bore insert bushes are available to accommodate different manufacturers spindle diameters.

300/355mm Blades

Circular saw blades are available in various outside and bore diameters. They are supplied with either High speed or Tungsten carbide teeth which are set at different rake angles dependant on the material being cut. Plastic bore insert bushes are available to accommodate different manufacturers spindle diameters.

DeWalt Batteries

Replacement batteries for Dewalt Cordless tools.

DeWalt Chargers

Replacement Chargers for Dewalt batteries. Most chargers are designed to recharge batteries between one hour (sometimes referred to as Fast Charge) and up to three hours.

DeWalt Crosscut Safety Boots

DeWalt Crosscut Safety Boots

Tile Cutters - Hand Held & Powered

A range of Powered Tile cutters for either the DIYer or Tiling professional.

Multi Material Drill Bits

Multi Material Drill Bits

Tile & Glass Drills

Latex Gloves

A non-slip design glove ideal for mechanics.

Leather Gloves

Rigger style leather palm providing protection for heavier work.

Rigger Gloves

Standard rigger gloves for general on-site or domestic use. The palm is made from a hard wearing suede cowhide with protective fingertips and deep safety cuff and knuckle strap.

Toolbags

A good selection of toolbags, usually made in heavy-duty fabric, Hessian or Polyester.

DeWalt Holesaws & Arbors

DeWalt Holesaws

DeWalt Vacuum Accessories

Steels - SDS Plus Fitting

DeWalt Sets

DeWalt Trainer 2 Safety Trainer

DeWalt Velocity Hiking Boots

DeWalt Rigger Safety Boots

DeWalt Maxi Safety Boots

DeWalt Panther Safety Trainers

DeWalt Laser Hiker Safety Boots

DeWalt Safety Trainers

DeWalt Grinder Safety Trainers

DeWalt Challenger Safety Boots

Black & Decker Torches

SDS Plus Drills

SDS Plus Drills - DeWalt

Impact Wrenches - Cordless

SDS Drills - Cordless

Crosscut Mitre Saws

Crosscut Mitre saws - These mitre saws allows the user to cut standard Crosscut mitres.

Compound & Dual Bevel Mitre Saws

Compound and Double Bevel Mitre saws - These mitre saws allows the user to cut complicated compound mitres.

Sliding Compound Mitre Saws

Sliding Compound and Double Bevel Mitre saws - These mitre saws allows the user to cut complicated compound mitres and the sliding facility allows for greater cross cutting capacity.

Table Top Mitre Saws

This mitre saw offers the user the choice of either a Crosscut mitre saw or a table saw, with blade diameter of 260mm. Bevel capacity of 48 degrees. Mitre capacity Right or Left 48 degrees

Carpenter & Construction Gloves

These Carpenter Gloves maintain flexibility by leaving three fingers free so nails or other small objects can be easily managed.

Steels - SDS Max Fitting

10.8/12 Volt Drill - Drivers

Powerful 12 Volt tool used for drilling metals, plastics and wood (but Not for Impact drilling) and Screwdriving applications.

12 Volt Hammer Combi Drills

Powerful 12 Volt Cordless Hammer (Combi) Drills - For heavy duty hammer drilling. These machines can be used for drilling masonry by use of the selectable impact mode, they can also be used as rotary drills for drilling other materials and if they have variable torque settings (stages) for screwdriving.

14.4 Volt Drill - Drivers

Powerful 14.4 Volt tool used for drilling metals, plastics and wood (but Not for Impact drilling) and Screwdriving applications.

14.4 Volt Hammer Combi Drills

Powerful 14.4 Volt Cordless Hammer (Combi) Drills - For heavy duty hammer drilling. These machines can be used for drilling masonry by use of the selectable impact mode, they can also be used as rotary drills for drilling other materials and if they have variable torque settings (stages) for screwdriving.

DeWalt Displays & Stands

Angle Grinders - 180mm Disc

Angle Grinders are designed for heavy-duty use and are versatile machines for cutting, grinding, polishing and sanding applications. They are used to cut metal, brick, paving slabs, roof tiles and concrete and are extensively used in construction industry. There are many different attachments that can be used for various materials and tasks, such as cut-off disks, Diamond discs, abrasive grinding disks, sanding disks, wire-brush wheels and polishing pads. Extreme care should be taken to ensure correct discs are fitted. Flat discs for cutting off and depressed centre discs for both cutting and grinding. Butting are usually 3.2 in thickness and grinding usually 5.0 or 6.5mm thick. Always double check if disc is suitable for stone or metal. The wearing of goggles is recommended. DONT use depressed centre "cutting wheels" as grinding wheels. These Angle Grinders take 180 mm (7 Inch) discs

Angle Grinders - 230mm Disc

Angle Grinders are designed for heavy-duty use and are versatile machines for cutting, grinding, polishing and sanding applications. They are used to cut metal, brick, paving slabs, roof tiles and concrete and are extensively used in construction industry. There are many different attachments that can be used for various materials and tasks, such as cut-off disks, Diamond discs, abrasive grinding disks, sanding disks, wire-brush wheels and polishing pads. Extreme care should be taken to ensure correct discs are fitted. Flat discs for cutting off and depressed centre discs for both cutting and grinding. Butting are usually 3.2 in thickness and grinding usually 5.0 or 6.5mm thick. Always double check if disc is suitable for stone or metal. The wearing of goggles is recommended. DONT use depressed centre "cutting wheels" as grinding wheels. These Angle Grinders take 230 mm (9 Inch) discs

Routers

Router are flexiable and versatile machines for use in either in the workshop or out on site,fixed to a router table or used freehand. The plunge router allow the motor and router bit to plunge up and down on spring loaded legs, combined with the right router bit (a wide range of router bits are available) their versatility includes uses in : joint construction, cutting groves, making mortise and tenons, dovetail and lap joints, fitting locks and hinges, making staircases, joining worktops and many different decorative and edge moulding uses. The two main sizes collets sizes are; 1/4in which is suitable for lightweight and medium-duty applications or 1/2in which suitable for medium-duty and heavy-duty applications. The 1/2in collet machines generally can use collet reduction adaptors to allow 1/4in, 6mm and 8mm shank router bits to be used.

Belt Sanders

Belt sanders are versatile machines capable of dealing with the roughest of surfaces and are mainly used for the rapid removal of flat stock and on large areas. They are ideal for stripping wood, floorboards, other preparation work and cleaning up glued panels. Unlike any other sander the belt sander cuts in one direction only which means it can be used parallel to the grain of the work piece minimising any cross grain damage. Variable speed makes a belt sander more versatile and less likely to damage delicate surfaces, sanding at a lower speed removes less material and creates less heat so finished such as paint and varnish are less likely to meal and fuse with the belt as they are being removed.

Random Orbital Sanders

Random orbital sanders combine the benefits of orbital and belt sanders and can produce fine finishes, even on contoured surfaces, and are versatile enough to tackle paint and rust removal, and polishing, with the right accessories. It can work along and across the grain making it an ideal finishing sander.

Detail & Multi Sanders

Angle Drills - Cordless

Trimsaw Blades for Cordless Saws

Laser Levels - Point / Cross Line

Laser Levels - Plumb Line

Laser Levels - Automatic Rotation

Jackets

These jackets from DeWalt and Scan offer protection from the elements when working outdoors.

Trousers & Shorts

Rain & Wet Suits

Caps & Hats

Windstopper Hat made from Gore Tex and Top Caps similar in appearance to a base ball cap but with built in protection against slight knocks.

Distance Estimators & Digital Tapes

Safety Spectacles

Safety spectacles some of which can be worn over standard spectacles. Design of the arms provide lateral protection. Ideal for protection against low energy impacts. Conforming to EN166 Grade 1 impact.

T Shirts & Sweatshirts

SDS Plus Hammers

SDS drills are hammer drills which have an enhanced hammer action over a normal hammer drill, they are able to deliver far greater energy per hammer blow, which when drilling hard masonry or concrete take conciderible less time than normal hammer drills. On some machines as well as the rotary and hammer action they can be used with the rotation switched off (Rotation Stop) to give just a hammer action for chiselling etc which is ideal for chasing cable runs or socket cut outs in walls, removing tiles, and light demolition work. They also have a different chuck design and use specialist SDS drill bits to withstand the force of the hammer action and also to eliminate the possibility of drill bit slipping. To unlock and change SDS bits, users simply pull back the spring-loaded chuck sleeve. These machines can operate in either Two or Three Modes. Two Mode machines have rotary drill and hammer action, three mode machines has both these plus Rotation Stop.

SDS Max Midsize Hammers

SDS Max machines are essentially the same as SDS+ machines but are used in heavier duty and larger applications. The machines take the SDS Max bits which have an 18mm shank and grip the bits in three places, whereas SDS+ machines take a 10mm shank and grip the bit in two places. Another difference is that SDS Max machines operate in two modes, Rotary Hammer and Rotary Stop , for chiselling etc which is ideal for chasing cable runs or socket cut outs in walls, removing tiles, and medium light demolition work. They do not operate in a Rotary only mode.

SDS Max Demolition Hammers

These heavy-duty machines are used for chiselling channels in concrete or other hard surfaces or for breaking up and demolishing builders materials. In demolition mode these tools do not rotate but are driven into the material by means of electro-pneumatic piston.

Reciprocating - Sabre Saws - Cordless

T Shank Diamond-Ceramic Blades

T Shank Blades - Metal

T Shank Blades - Wood

DeWalt Impact Work Boots

DeWalt Explorer Safety Boots

DeWalt Apprentice Sports Boots

Orbital Sanders 1/2 Sheet

Orbital sanders are often referred to as finishing sanders and they operate with a circular motion to create a smooth finish when used correctly, they work best when only slight pressure is used. They are available in three different sizes, 1/4, 1/3 or 1/2 sheet. 1/4 sheet machines are also know as Palm Sanders and are ideal for one handed use and for using in confined areas. 1/3 sheet machines are ideal for most sanding jobs around the home and are easy to handle. 1/2 sheet machines are aimed at trade applications where the larger pad size measn quicker work.

Plunge Saws

These versatile Plunge Saws (also known as Track Saws) revolutionises the way you use a traditional circular saw, they give Panel Saw capacity, table saw precision with circular saw portability. In addition to standard circular saw capabilities with these saws you'll be able to make inside plunge cuts and trim interior doors.

Impact Drivers - Cordless

DeWalt Hammer Work Boots

Hammers Boots

1/2 Orbital Sanding Sheets

1/2 Size Orbital Sanding Sheets

Drywall Screwdrivers - Cordless

Drywall Screwdrivers - Cordless

1/3 Orbital Sanding Sheets

1/3 Size Orbital Sanding Sheets

SDS Dust Extraction Systems

SDS Dust Extraction Systems