Workmates

A bench that has many features for clamping and holding different shape workpieces. They are extremely portable and collapsible for easy storage.

18 Volt Drill - Drivers

Powerful 18 Volt Drill Drivers used for drilling metals, plastics and wood (but Not for Impact drilling) and Screwdriving applications.

18 Volt Hammer Combi Drills

Powerful 18 Volt Cordless Hammer (Combi) Drills - For heavy duty hammer drilling. These machines can be used for drilling masonry by use of the selectable impact mode, they can also be used as rotary drills for drilling other materials and if they have variable torque settings (stages) for screwdriving.

Hammer Drills 500-690 Watts

Hammer Drills 500-690 Watts

Hammer Drills 700-1050 Watts

Hammer Drills 700-1050 Watts

Screwdrivers - Cordless 2.4-7.2 Volt

Jigsaws

Jigsaws, with the right blade attached , are capable of a variety of jobs in a wide range of materials from ripping and cross cutting in both solid timbers , man made materials and thin metals, to intricate curves and internal shaped work. Jigsaws with an Orbital or pendulum action speed up cutting by moving the blade in a slightly circular motion, when using a normal jigsaw blade it cuts on the upward movement by moving the blade forward and then back on the downward movement, this increased cutting speed will give you a coarser finish. When precision cutting, plunge cutting or cutting metal is required the orbital action should be turned off. When making a straight cut it is ideal to use a slower cutting speed and a wider blade to prevent the blade from bending or pulling the saw off course.

Mini Angle Grinders - 115mm Disc

Mini Angle Grinders are designed for use in tight work areas and with the right cutting or grinding disc, wire brush or sanding disc they are ideal for those medium duty sanding and grinding projects. They are used to cut metal, brick and concrete and are extensively used in construction industry and for cutting grinding applications at home. There are many different attachments that can be used for various materials and tasks, such as cut-off disks, Diamond Blades, abrasive grinding disks, sanding disks, wire-brush wheels and polishing pads. Extreme care should be taken to ensure correct discs are fitted. Flat discs for cutting off and depressed centre discs for both cutting and grinding. Butting are usually 3.2 in thickness and grinding usually 5.0 or 6.5mm thick. Always double check if disc is suitable for stone or metal. The wearing of goggles is recommended. DONT use depressed centre "cutting wheels" as grinding wheels. These Mini Angle Grinders take 115 mm (4 1/2 Inch) discs

Orbital Sanders 1/3 Sheet

Orbital sanders are often referred to as finishing sanders and they operate with a circular motion to create a smooth finish when used correctly, they work best when only slight pressure is used. They are available in three different sizes, 1/4, 1/3 or 1/2 sheet. 1/4 sheet machines are also know as Palm Sanders and are ideal for one handed use and for using in confined areas. 1/3 sheet machines are ideal for most sanding jobs around the home and are easy to handle. 1/2 sheet machines are aimed at trade applications where the larger pad size measn quicker work.

Orbital Sanders 1/4 Sheet

Orbital sanders are often referred to as finishing sanders and they operate with a circular motion to create a smooth finish when used correctly, they work best when only slight pressure is used. They are available in three different sizes, 1/4, 1/3 or 1/2 sheet. 1/4 sheet machines are also know as Palm Sanders and are ideal for one handed use and for using in confined areas. 1/3 sheet machines are ideal for most sanding jobs around the home and are easy to handle. 1/2 sheet machines are aimed at trade applications where the larger pad size measn quicker work.

Powered Hand Saws

Think of a handsaw without the hard work. From fence posts to drain pipes , Floorboards to Worktops these powered handsaws give you a fast clean cut in seconds.

Powerfiles

The narrow sanding belt is ideal for sharpening, shaping, filing, sanding, sculpting and finishing wood and is also useful for removing rust, paint and bolt heads.

Reciprocating - Sabre Saws

Reciprocating saws (also know as Sabre Saws) operate on a similar principle to jigsaws but with the blade protruding from the front of the machine. They are intended for freehand use and a range of blades are available to suit different materials and cutting applications. Most saws have moveable front shoes which help to prolong the life of the blade by evening the wear when cutting thin material. With the correct blade theres virtually no building material it cant cut. it is an ideal tool to have for construction , workshop or for jobs around the home and garden.

Grass Strimmers

Lawnrakers & Sweepers

Leafbusters Blowers & Mulching Vacs

They are ideal machines for clearing leaves, grass cuttings and general debris from small and large gardens

Power Hoe

Cordless power hoe, Ideal for light cultivating and weeding

Powered Pruning Machines

Works just like a manual lopper but with the power of a chainsaw

Shredders

Electric powered garden Shredders. The Garden shredder will reduce large branches, annual prunings and other garden waste into a fine garden mulch.

Shrub & Shear Kit

Ideal for trimming small shrubs and intricate areas

Strimmer Spool - Lines & Accessories

Replacement trimmer spools and lines.

Wallpaper Strippers - Steamers

Designed to remove all types of wallpaper, multi-layered and printed papers, including artex. Numerous models are available with different wattage and water resovoir capacities to suit individual specific needs. Designed with pressure relief valves.

7.2 - 9.6 & 12 Volt Cordless Dustbusters

2.4 - 3.6 & 4.8 Volt Cordless Dustbusters

Screwdriver Bits & Holders - Black & Decker

Hedge Trimmers

In deciding whether to purchase an electric hedge trimmer or a petrol/gas hedge trimmer, consider the tasks you need the trimmer for. Petrol/gas trimmers are more powerful than electric machines. It is important that a hedge trimmer is not so heavy that you struggle to hold it for the duration of cutting the hedge. If the trimmer is too heavy, the risk of dropping the trimmer increases as you tire.

Black & Decker Masonry Drills

Chainsaws

Chainsaw range can tackle most heavy-duty sawing jobs from cutting logs for fires to pruning large tree branches. Chainsaws are powerful tools and it is imperative that you wear protective safety clothing - particulary a hard hat in case a branch falls on you, leg chaps to protect your legs from the saw should it slip, leather boots with steel toe-caps, gloves with a good grip, protection for your ears from the noise of the saw and goggles to protect your eyes from wood chips. Also avoid loose clothing that might get caught in the chain.

Chain Oil

Black & Decker Accessories

A range of sanding accessories for the Black and Decker Mouse and Quattro machines Including sheets, wire wool sheets, Polishing and Cleaning kits.

Alligator & Scorpion Saw Blades

A range of replacement blades with high speed and Tungsten carbide tipped teeth suitable for cutting Drywall board, hard and soft wood, Plywood, Chipboard, MDF, Building blocks and bricks etc. Available in several lengths.

Circular Saws

Circular saws are ideal for making rapid and accurate long cuts (with the addition of a guide accurate cuts are easily achieved) or cutting large volumes of timber, MDF, Plywood and other man made materials and in some cases with the correct blade, thin metals.

Circular & Trim Saws - Cordless

Circular saws are ideal for making long cuts (with the addition of a guide accurate cuts are easily achieved) or cutting large volumes of timber, MDF, Plywood and other man made materials and in some cases thin metals. A safer alternative to corded circular saws these cordless saws have the advantage of being instantly useable and in some cases are light enough to use one handed.

Extension Cables & Garden Sockets

Extension leads for the gardens and temporary power garden sockets.

Flexible Shafts

Flexible drive shafts enable the user to reach awkward work positions when drilling. The shaft fits into any 1/2in capacity power drill chuck and has a chuck fitted on the other end. Approximate length of shaft is 1300mm

Glue Guns

A range of DIY and Industrial Glue Guns. Used to apply Hot Liquid Glue. Dry stick of glue loaded into the glue gun, which when heated provides a thin stream of Liquid Glue via operation of the trigger. When trigger is released, supply is cut-off. Thus preventing excess glue on work piece or bench. Ideal for model making. Can also be used as a Caulking Tool when loaded with Caulking Sticks.

Heat Gun Nozzles

A selection of Nozzles for heat guns such as heat spreader glass protector. They are designed to concentrate or dissipate hot air expelled from the gun.

Heat Guns

Heat guns provide a safe and effective way of quickly stripping oil based paints such as gloss, eggshell and varnish from wooden surfaces. They are particularly useful for defrosting metal pipes and moulding plastics.

Hinge - Boring Bits

Saw Tooth & Lip & Spur Bits

Masonry Drill Sets

A selection of straight shank masonry drills supplied in a robust plastic case with a see-through lid. These drills have a bright steel finish with a tungsten carbide tip and are designed for drilling bricks and concrete.

Multitool - Rotary Tool

A selection of DIY multitools. A multi purpose tool is used for smaller jobs around the home or garden. It can be used for drilling, de-rusting, sanding and polishing, cutting, engraving etc. By using the various attachments available.

Electric Planers

Powered planers are the powered version of the classic woodworking hand plane; they are capable of removing large amounts of material with the minimum of effort and in most cases will give a good clean finish. Whilst they cannot match hand planes for finish they are able to plane man made boards such as MDF and Chipboard. Typically, these tools can remove 1.5mm of material with each pass although some can go deeper.

Water Pumps

A small water pump to be powered by a electric drill. Most are self-priming and have a 1/4in parallel drive spindle to fit the majority of power drill chucks. Pumps up to 15 litres/min (200gallons/hour).

Holesaws Kits - Sets

Black & Decker Wizard Accessories

Accessories for use with the Black and Decker Wizard. For sanding ,drilling, polishing, cutting and engraving by using the various attachments available.

Cup Brushes Twist Knot

Cup Brushes with Shanks

Auto Adjustable Wrenches

Wheel Brushes Crimped Wire with Shanks

Countersink Bits for Wood

A countersink designed for use with hand or power drills. The countersink produces a chamfered hole, allowing flat head countersink screws to sit neatly in the hole flush with the surface of the timber.

136mm Blades

Circular saw blades are available in various outside and bore diameters. They are supplied with either High speed or Tungsten carbide teeth which are set at different rake angles dependant on the material being cut. Plastic bore insert bushes are available to accommodate different manufacturers spindle diameters.

160mm Blades

Circular saw blades are available in various outside and bore diameters. They are supplied with either High speed or Tungsten carbide teeth which are set at different rake angles dependant on the material being cut. Plastic bore insert bushes are available to accommodate different manufacturers spindle diameters.

184mm Blades

Circular saw blades are available in various outside and bore diameters. They are supplied with either High speed or Tungsten carbide teeth which are set at different rake angles dependant on the material being cut. Plastic bore insert bushes are available to accommodate different manufacturers spindle diameters.

Powerfile Sanding Belts

These belts are suitable for use with Power file sanders.

Replacement Drive Belts

A range of replacement planer drive belts to suit Black & Decker planers only. The belt transfers power from the motor to the drive spindle rotating the bladedrum.

Drumsanders & Belts

Dust - Collection Bags

A range of Dust collection bags designed to attach to the corresponding electric power tool, limiting the amount of waste material discharged.

Flap Wheels

These flexible and long lasting aluminium oxide flaps are secured with a resin bond for extra strength and service life. Their design ensures a consistent finish making them ideally suited for sanding shaped and curved work pieces without the risk of clogging. The wheels have a built-in arbor shaft for securing in the chuck of most power drills.

Tile & Glass Drills

Spare Chains

Replacement chains for Chainsaws.

Black & Decker Powershot Nails & Staples

Detail, Mouse Sanding Sheets

1/2 Sanding Sheets 115mm x 280mm

Multi Sander Sheets

1/3 Sanding Sheets 93mm x 230mm

Dowels

Replacement Planer Blades

A range of replacement planer cutting blades for various makes of electric planer. Manufactured in either HSS or Tungsten Carbide.

127mm Blades

Circular saw blades are available in various outside and bore diameters. They are supplied with either High speed or Tungsten carbide teeth which are set at different rake angles dependant on the material being cut. Plastic bore insert bushes are available to accommodate different manufacturers spindle diameters.

140mm Blades

Circular saw blades are available in various outside and bore diameters. They are supplied with either High speed or Tungsten carbide teeth which are set at different rake angles dependant on the material being cut. Plastic bore insert bushes are available to accommodate different manufacturers spindle diameters.

DIY Chucks & Keys

Replacement chucks & keys are available in various sizes and capacities. Also chucks are available in keyed or keyless versions.

Bandsaw Blades to suit Black & Decker Saws

Sanding Discs 125mm

Black & Decker Metric Drills

A general-purpose engineering workshop drill, used for drilling various ferrous and non-ferrous metals. A standard helix right hand spiral jobber drill.

Black & Decker Sets

Black & Decker Drill Sets

Black & Decker Torches

Backing Pads - B/D & Wolfcraft

Arbors for Backing Pads

Mains Powered Vacuum Cleaners

Dustbusters replacement filters

Black & Decker Batteries

Replacement batteries to suit Black and Decker cordless power tools.

12 Volt Drill - Drivers

Powerful 12 Volt tool used for drilling metals, plastics and wood (but Not for Impact drilling) and Screwdriving applications.

12 Volt Hammer Combi Drills

Powerful 12 Volt Cordless Hammer (Combi) Drills - For heavy duty hammer drilling. These machines can be used for drilling masonry by use of the selectable impact mode, they can also be used as rotary drills for drilling other materials and if they have variable torque settings (stages) for screwdriving.

14.4 Volt Hammer Combi Drills

Powerful 14.4 Volt Cordless Hammer (Combi) Drills - For heavy duty hammer drilling. These machines can be used for drilling masonry by use of the selectable impact mode, they can also be used as rotary drills for drilling other materials and if they have variable torque settings (stages) for screwdriving.

Routers

Router are flexiable and versatile machines for use in either in the workshop or out on site,fixed to a router table or used freehand. The plunge router allow the motor and router bit to plunge up and down on spring loaded legs, combined with the right router bit (a wide range of router bits are available) their versatility includes uses in : joint construction, cutting groves, making mortise and tenons, dovetail and lap joints, fitting locks and hinges, making staircases, joining worktops and many different decorative and edge moulding uses. The two main sizes collets sizes are; 1/4in which is suitable for lightweight and medium-duty applications or 1/2in which suitable for medium-duty and heavy-duty applications. The 1/2in collet machines generally can use collet reduction adaptors to allow 1/4in, 6mm and 8mm shank router bits to be used.

Belt Sanders

Belt sanders are versatile machines capable of dealing with the roughest of surfaces and are mainly used for the rapid removal of flat stock and on large areas. They are ideal for stripping wood, floorboards, other preparation work and cleaning up glued panels. Unlike any other sander the belt sander cuts in one direction only which means it can be used parallel to the grain of the work piece minimising any cross grain damage. Variable speed makes a belt sander more versatile and less likely to damage delicate surfaces, sanding at a lower speed removes less material and creates less heat so finished such as paint and varnish are less likely to meal and fuse with the belt as they are being removed.

Detail & Multi Sanders

Trucks

Fibre Discs Aluminium Oxide - 115mm

450mm x 75mm Cloth Sanding Belts

533mm x 75mm Cloth Sanding Belts

Black & Decker Piranha Drills

Laser Levels - Point / Spot

115mm Cutting & Grinding Discs for Stone

115mm Cutting & Grinding Discs

Distance Estimators & Digital Tapes

Gas & Battery Soldering Irons

Gas soldering irons are powered by butane gas and are ideal for small work on jewellery, models and electrical items.

Caulking Gun - Cordless

Universal Blades - Assorted

Universal Blades - Metal

Universal Blades - Wood

Resin Bonded Silicon Fibre Discs 125mm