Malleable Iron head fitted with cylindrical aluminium faces. The malleable iron head and the aluminium faces combine to provide the weight for the blow and the faces prevent damage to most items being struck. Ideal where a heavy blow is required combined with a relatively small striking area. Faces are designed to wear and can be replaced. Used as a general-purpose soft-faced hammer in engineering for assembly, repair and maintenance as an alternative to copper.
Ballpein hammers are used universally for engineering and metal working. Both the round ballpein end and the conventional end are hardened and tempered.
Brick Hammers are used by Bricklayers for tapping bricks into place with the square end and dressing bricks to shape with the chisel shape end.
Used by Carpenters etc. for Driving and Removing nails. The General- purpose claw hammer features the traditional curved claw, used for pulling nails, the straight claw is used for levering boards or laps. Remember that a Claw Hammer is a nailing hammer and should not be used for striking Cold chisels or Masonry nails.
Club hammers are used for Heavy Hammering, such as with Cold Chisels and Brick Bolsters and may also be considered for use on light demolition work.
Copper and Rawhide Hammers are excellent dual-purpose hammers for the automotive and general industrial applications. Malleable Iron head fitted with one Rawhide and one Copper cylindrical face. The malleable Iron head and the Copper/Rawhide faces combine to provide the weight for the blow and the faces prevent damage to most items being struck. Ideal where a heavy blow is required combined with a relatively small striking area. Faces are designed to wear and can be replaced. Used as a multi purpose soft faced hammer in engineering and automotive for assembly, repair and maintenance.
Dead Blow Hammers are intended to avoid rebound and recoil. The hollow heads are filled with metal shot. Often used for driving and the positioning of heavy objects.
Nylon and Plastic Faced Hammers and Spare Faces.
Rubber and Soft Faced Hammers and Spare Faces.
Scutch Hammers are used by Bricklayers for dressing bricks and masonry. Replaceable comb and chisel bits are available. Scutch Hammers are single or double ended to suit most Bricklayers needs.
General purpose heavy hammer for building work.
Blocking, Chipping, Drywall, Finishing, Geologist, Jewellers, Joist, Lath, Pin, Planishing, Roofers, Scaling, Slaters, Split Head, Tack, Upholsterers and Walling Hammers.
Sometimes called Joiners or Cross Pein Hammers are used in the woodwork Industry for woodwork assembly or driving nails. The smaller sizes are suitable for fixing cable clips panel pins etc.
A range of replacement Hammer Handles and Hammer Wedges.
Bossing, Carpenters, Carver, Hardwood, Plastic, Rawhide, Rubber and Tinmans Mallets.
Estwing only From £31.49
Faithfull only From £23.67
Faithfull only From £8.06