A wide range of 1/4in drive Sockets & Accessories. Included in this range Britool, Teng, Stanley & Stahwille
A wide range of 3/8in drive Sockets & Accessories. Included in this range Britool, Teng, Stanley & Stahwille
A wide range of 1/2in drive Sockets & Accessories. Included in this range Britool, Teng, Stanley & Stahwille
A wide range of 3/4in drive Sockets & Accessories. Included in this range Britool, Teng, Stanley & Stahwille
Socket Clips manufactured from Spring Steel, Bright Chrome Plated. Used to position sockets on rails. Suitable for 3/8 Inch or 1/2 Inch drive sockets. The rails can be fixed or loose in a tool box, fitted to a bench or wall.
A wide range of Socket sets, available in a full range of Square Drives - 1/4in, 3/8in, 1/2in, 3/4in & 1in
Zyklop Sockets & Socket Sets
Open Jaw at one end and closed at the other (Ring). Both ends being of the same size. The greater strength of the Ring is used to loosen the nut, which can be quickly removed with the faster open jaw.
Like most Spanners Open-ended are often Double-ended. The ends are usually of consecutive sizes. Main advantage is that it can be used where there is an obstruction directly above the Nut, or on Pipe Unions, where the Pipe would restrict the use of a Ring Spanner.
The completely enclosed head of a Ring Spanner is potentially stronger than any Open-ended Spanner. The length of the Spanner varies in proportion to the size of the nut used on. This limits the amount of torque applied to smaller nuts.
Double-ended, Ratchet Mechanism Wrenches provide a simple solution when space is limited. Movement is reversed simply by turning the wrench over. The bihexagon ring form is broached to ensure a perfect non-slip fit. Offset pattern are angled at 25 degrees to give additional clearance. Direction is changed by depressing a reversing lever.
Designed for dealing with Union Nuts on Wiring or Pipes. The gap in the head allows access where the use of a standard Ring Wrench is not possible. Heads are set at an angle of 15 degrees and each end is a different size.
Spanners - Flex Head
A range of spanner sets including: Combination, Open Ended, Midget, Ring, Open Ring
Heavy-Duty Open Ended Cranked Spanner, Black Corrosion Resistant finish. Tapered end is generally used for hole alignment. Various sizes available.
Reversible drive, for either moving very tight screws or for firm final screw tightening. Hexagon adaptor has 1/2 Inch square drive with crosspoint and plain slot Hexagon Bits, with the tool in position strike the end with a Hammer inside the handle is a mechanism which converts the blow into torque to break free a tight fitting. Clockwise and Anti-Clockwise movement can be selected.
AF, BA Metric, Whitworth and Spark Plug Box Spanners and Tommy Bars.. Most Box Spanners are made from Metal tubing on dare double ended with different sizes at each end. Single ended pattern look like socket extensions. Engaging the nut from above which can be spun tight by fingers and final torque can be obtained via a Tommy bar A range across flat sizes in various lengths
Specially designed for use with Slotted Retaining Rings. The hinge design allows use on a range of diameters. C Pattern.
Used for removing rusted on nuts from studs Etc. A Spanner is used to turn the hexagon end, which has the effect of forcing the chisel end into a flat of the nut, forcing it apart with out damage to the thread of the stud. Available in various sizes.
3/8in, 1/2in, 3/4in, and 1in Drive Torque Wrenches.
Specialist Mechanics Tools
Tool Tray System
Bahco only £60.00
Bahco only £39.99
Faithfull only £18.94